1-800-748-5781
A value-priced synthetic 0W-40 engine oil for RAM 6.4L engines in 2500, 3500, 4500 and 5500 series pick-up trucks. Priced right for fleets and API-licensed.
Suitable Applications For AMSOIL OE 0W-40
AMSOIL OE 0W-40 Synthetic Motor Oil is suitable for use in any gasoline-fueled engine requiring a 0W-40 motor oil with the API SP (or older) specification. Ideal for RAM pick-up trucks with the 6.4L engine. This product meets manufacturer warranties where API specifications are suggested. This makes OE 0W-40 a safe choice for fleets.
Recommended for all makes requiring the following specifications:
- API SP, SN Plus, SM
Dependable Wear Protection
Protect your investment with AMSOIL’s famous wear-fighting know-how. AMSOIL OE Synthetic 0W-40 is designed to maintain steady viscosity consistency across the entire service interval. It is engineered to resist metal-to-metal contact and extreme heat.
Built For All Temperatures
AMSOIL OE 0W-40 Synthetic Motor Oil is designed to withstand extreme operating temperatures from heavy loads and hot climates. It provides consistent protection and resists oil consumption under these stresses.
A cold-pour point of -44°F means instant cold-start wear protection.
Keeps Engine Internals Clean
AMSOIL OE Synthetic 0W-40’s powerful formula prevents the formation of varnish and sludge. It keeps engine internals clean while preventing performance loss and low-speed pre-ignition.
Mixing AMSOIL With Other Brands
AMSOIL OE 0W-40 Synthetic Motor Oil is compatible with all other brands of conventional and synthetic motor oils. While you can safely mix AMSOIL OE Synthetic Oil with other brands, this will reduce the drain interval and performance capabilities of this product.
Do NOT use aftermarket engine oil additives with this motor oil.
Service Life Of AMSOIL OE 0W-40 Synthetic Motor Oil
AMSOIL OE 0W-40 Synthetic Motor Oil is recommended for oil change intervals as stated by the vehicle owner’s manual or as indicated by the vehicle’s oil life monitoring system. Change oil filter at every oil change.
Specifications
|
0W-40 |
|
| Kinematic Viscosity @ 100°C, cSt (ASTM D-445) |
15.3 |
|
| Kinematic Viscosity @ 40°C, cSt (ASTM D-445) |
88.0 |
|
| Viscosity Index (ASTM D-2270) |
185 |
|
| CCS Viscosity, cP @ (°C) (ASTM D-5293) |
6024 (-35) |
|
| Flash Point °C (°F) (ASTM D-92) |
220 (428) |
|
| Fire Point °C (°F) (ASTM D-92) |
232 (450) |
|
| Pour Point °C (°F) (ASTM D-97) |
-42 (-44) |
|
| Noack Volatility, % weight loss (g/100g) (ASTM D-5800) |
11.4 |
|
| High Temperature/High Shear Viscosity @ 150°C and 1.0 X 106 s-1, cP (ASTM D-5481) |
4.1 |
|
| Total Base Number (ASTM D-2896) |
8.0 |
|
